Electrosurgical Units / EK-250
Electrosurgical Device
The EK-250 electrosurgical unit prioritizes patient safety in its design. Upon startup, the device performs a self-check of all modes and only allows operation after confirming that no issues are present. If the patient plate loses contact, the device automatically cuts off the output.
The cutting and coagulation modes have distinct alert sounds, making them easily distinguishable during use. Additionally, the device provides an audible alert if the patient plate loses contact. The EK-250 model features two monopolar and one bipolar outputs, allowing two surgeons to use it sequentially in monopolar mode or simultaneously in bipolar mode. With its integrated vessel sealing feature, vessels up to 7 mm can be effectively sealed. Advanced memory capabilities allow users to store up to 50 frequently used modes with personalized names, and these can be easily recalled. The device also keeps a log of the last 99 technical faults, which can be viewed in the fault menu. The EK-250 model is equipped with two separate boards for monopolar and bipolar functions, allowing continued operation with the other board in case one fails. The device has universal connection ports compatible with internationally standardized accessories.
| Features | Property Value |
|---|---|
|
Device modes |
Monopolar – Bipolar
|
|
Memory feature |
50 different user settings can be added
|
|
Voice warning system |
Yes |
|
Information / Menu screen |
LCD screen
|
|
Automatic check at every boot |
Yes
|
|
Use of 2 surgeons at the same time |
Yes |
|
Vascular sealing |
Yes |
|
Patient protection system |
Yes |
|
Foot pedal |
Yes |
|
Screen brightness adjustment |
5 levels of screen brightness
|
| Features | Property Value |
|---|---|
|
Maximum output power pure CUT |
250 W → 300 Ω
|
|
Maximum output power cut-coag CUT80% |
220 W → 300 Ω
|
|
Maximum output power cut-coag CUT60% |
200 W → 300 Ω
|
|
Maximum output power cut-coag CUT40% |
150 W → 300 Ω
|
|
Maximum output power cut ENHANCED |
150 W → 500 Ω
|
|
Maximum output power cut-coag BLEND |
150 W → 300 Ω
|
|
Maximum output power coag SPEEDY |
100 W → 500 Ω
|
|
Maximum output power coag DEEP |
100 W → 200 Ω
|
|
Maximum output power coag SPRAY |
60 W → 2000 Ω
|
|
Maximum output power coag SPRAY ARGON |
60 W → 2000 Ω
|
| Features | Property Value |
|---|---|
|
Maximum output power pure CUT |
120 W → 150 Ω
|
|
Maximum output power cut-coag CUT80% |
100% W → 150 Ω |
|
Maximum output power cut-coag CUT60% |
100% W → 150 Ω |
|
Maximum output power cut-coag CUT40% |
60 W → 150 Ω |
|
Maximum output power cut-coag BLEND |
100 W → 150 Ω
|
|
Maximum output power coag COAG |
120W → 50 Ω
|
|
Core Sealing Output Power |
200W→50 Ω
|
|
Operating Frequency Monopolar / Bipolar |
425 kHz / 525 kHz
|
| Features | Property Value |
|---|---|
|
Electrosurgical Unit Pen Disposable (EK-004) |
5 pieces
|
|
Electrosurgical Unit Pen Reusable (EK-001) |
1 piece
|
|
Bipolar Collet (Forcep) (EK-018) |
1 piece
|
|
Bipolar Clamp Cable (EK-030) |
1 piece
|
|
Patient Plate Disposable (EK-006) |
5 pieces
|
|
Patient Plate Cable (EK-007) |
1 piece
|
|
Electrode Cutter (EK-010) |
6 pieces
|
|
Electrode Needle (EK-011) |
3 pieces
|
|
Electrode Sphere (EK-014) |
3 pieces
|
|
Double Foot Pedal (EK-090) |
1 pieces
|
|
Electrode Cleaning Sponge |
1 pieces
|
|
Power Cable |
1 pieces
|
